I tested 80 UK plumber websites. Here's the data, and it isn't pretty

I tested 80 UK plumber websites on a phone. 73 failed Google's 2.5-second test and none was fast with every SEO basic right. The data, and what to fix.

Mike ArnoldPublished Last updated 15 min read

Short answer

I tested 80 UK plumbers' home pages in Google's mobile speed test and checked 10 SEO basics on each. 73 of the 80 (91%) took longer than Google's 2.5-second limit to show their main content, the typical one took 9 seconds, and only 12 (15%) got all 10 basics right. Not one site was both fast and passed every basic.

I wanted to know what plumbers’ websites in the UK actually look like to Google. Not the shiny ones on “best plumbing websites” lists. The normal ones, the kind you land on when your boiler packs in on a Sunday.

So I pulled the UK plumbers and heating engineers listed on OpenStreetMap, the free, crowd-sourced map, kept the ones with their own website, ran each home page through Google’s mobile speed test three times, and checked it for 10 SEO basics. After clearing out the chains, merchants, dead links and parked domains, I had 80 real plumbers’ websites.

Here’s what I found. Short version: most of them are slow, a lot of them are missing the basics, and not one of the 80 got both right.

The upside? The bar is low. With 91% of these sites failing Google’s speed test, you don’t need a perfect website to stand out. Get your main content showing inside 2.5 seconds and you’re already quicker than 73 of the 80, the top 10%. There’s loads of room for improvement, and that’s good news if yours is one of the slow ones.

91%fail Google’s 2.5s limit on a phone (73 of 80)
9.0stypical time to show the main content
15%pass all 10 SEO basics (12 of 80)
0sites that are fast and pass every basic

80 UK plumbers’ home pages, Google PageSpeed Insights mobile lab test (middle of three runs) and 10 SEO checks, 27 October 2026.

How fast are UK plumber websites?

Mostly, they’re not. In Google’s mobile test, 73 of the 80 plumbers’ home pages (91%) took longer than 2.5 seconds to show their main content, which is the line Google calls good. The middle site took 9.0 seconds, and 58 of the 80 (72.5%) took longer than 5.

The 2.5 seconds is Google’s own threshold for Largest Contentful Paint, the moment the biggest thing on the page (usually the hero image or headline) appears (Google’s Core Web Vitals guide). Here’s where the 80 sites landed:

Figure

Only 7 of 80 plumbers’ home pages showed their main content inside Google’s 2.5-second limit

2.5s or lessGoogle: good7 sites
2.5 to 4sGoogle: needs improvement8 sites
4 to 5sGoogle: poor7 sites
5 to 10s26 sites
10 to 20s27 sites
Over 20s5 sites
Largest Contentful Paint for 80 UK plumbers’ home pages, Google PageSpeed Insights mobile lab test, middle of three runs, 27 October 2026. Download the data.

Thirty-two of the 80 took longer than 10 seconds. The slowest took over 32.

The overall speed scores tell the same story. The middle score was 60.5 out of 100, and the middle half of sites scored between 50 and 74:

Speed score (mobile) Google calls it Sites
90 to 100 Good 7 of 80 (8.8%)
50 to 89 Needs improvement 54 of 80 (67.5%)
Under 50 Poor 19 of 80 (23.8%)

The usual reason is weight. The typical home page weighed 1.85 MB, 38 of the 80 weighed more than 2 MB, and the heaviest 10% started at 9 MB. Weight like that usually comes from photos that were never resized and page builder code that loads on every page whether it’s needed or not.

The one thing most sites got right: layout shift. 71 of the 80 (88.8%) kept their pages from jumping around as they loaded, inside Google’s good level.

Which SEO basics do plumber websites get wrong?

Only 12 of the 80 sites (15%) passed all 10 basics I checked. The three missed most often were local business schema (46 sites without it), the meta description (32 missing or too long) and the H1 heading (30 with none or more than one).

I checked 10 things on each home page that any decent website should have. None of them are advanced. Here’s how often each one was missed:

Figure

Local business schema was missing on more than half the plumbers’ sites

Local business schemamissing46 of 80
Meta descriptiontoo long or missing32 of 80
One H1 headingnone, or more than one30 of 80
Page titletoo long, likely cut off29 of 80
One addresswww and non-www disagree14 of 80
Alt text on imagessome missing11 of 80
Sitemapnone found8 of 80
HTTPSnot secure4 of 80
Mobile viewportnot set3 of 80
Open to Googleblocked with noindex1 of 80
Sites failing each check, out of 80 UK plumbers’ home pages, 27 October 2026. Title and description lengths are rules of thumb; the rest are pass or fail. Download the data.

A few of these deserve a closer look:

  • Local business schema (46 missing). It’s a bit of code that tells Google your business name, phone number, address, hours and the area you cover, in a format it doesn’t have to guess at. For a local trade, that’s the whole job of the website.
  • Titles and descriptions. 29 titles were too long, so Google is likely to cut them off in the results. 19 descriptions were too long and 13 were missing completely, which leaves Google to make one up from whatever’s on the page.
  • H1 headings. 18 sites had more than one main heading and 12 had none at all. The H1 is the page’s headline; it’s one of the clearest signals of what the page is about.
  • One address (14). On these sites, the www and non-www versions of the address didn’t end up in the same place, which can leave Google with two copies of the same site.
  • The one blocked from Google. One plumber’s home page told Google not to index it. That’s the website equivalent of a shop with the shutters down.

The spread: 12 sites passed all 10, 18 passed 9, 18 passed 8, 15 passed 7 and 17 passed 6 or fewer. Nobody scored below 4.

Does WordPress make plumber websites slower?

Not in this data. WordPress ran 42 of the 80 sites (52.5%) and their middle speed score was 59.5, almost exactly the overall middle of 60.5. The platform on its own didn’t decide whether a site was fast.

Website builder Sites Share Middle speed score
WordPress 42 52.5% 59.5
Couldn’t tell from the page source 20 25.0% 69
Wix 7 8.8% 60
Duda 5 6.3% 83
Squarespace 3 3.8% Too few to say
GoDaddy, Webflow, Shopify 1 each 1.3% each Too few to say

I wouldn’t rank the builders against each other from this. Duda’s 83 rests on 5 sites, and with groups this small the gaps don’t mean much. What the table does show is that WordPress is what most plumbers’ sites run on, and that you can build a slow site, or a quick one, on any of them. The platform matters far less than what gets loaded onto it.

How many plumber websites look abandoned?

About a third of the ones that show a date. 52 of the 80 sites had a copyright year in the footer, and 17 of those showed 2023 or earlier. An old footer year isn’t proof a site’s been forgotten, but it’s often the first thing that gives it away.

Of the 52 dated footers, 27 showed 2026, 6 showed 2025, 2 showed 2024 and 17 showed 2023 or earlier. The oldest went back to 2013.

And then there were the ones that didn’t make the study at all. Of the plumbers’ web addresses listed on OpenStreetMap, three now lead to parked domains or domains for sale, and one plumber’s old address now runs a casino website. Somebody, somewhere, is still handing out business cards with that on.

How does your website compare?

Run your home page through PageSpeed Insights and compare your numbers with the 80 sites. A mobile score of 70 beats 52 of them (65%), main content inside 4 seconds beats 65 (81.3%), and passing all 10 basics beats 68 (85%).

Free tool · Compare your site

How does your home page stack up against the 80?

Run your home page through PageSpeed Insights, look at the Mobile tab, and pop in the numbers. Fill in as many as you like. Nothing leaves your browser.

Or use the quick-reference version. “Beat” means better than, so a tie doesn’t count:

If your home page… You beat Sites beaten
Shows its main content in 2.5s on a phone 91.3% 73 of 80
Shows its main content in 4s 81.3% 65 of 80
Shows its main content in 5s 72.5% 58 of 80
Scores 90 for mobile speed 91.3% 73 of 80
Scores 80 78.8% 63 of 80
Scores 70 65.0% 52 of 80
Scores 60 45.0% 36 of 80
Passes all 10 SEO basics 85.0% 68 of 80
Passes 9 of 10 62.5% 50 of 80
Weighs under 1 MB 72.5% 58 of 80
Weighs under 500 KB 88.8% 71 of 80

There’s no row for “fast and all 10 basics”, because none of the 80 did it. If your site does, you’d be the only one in the study.

SEO for plumbers: what should you fix first?

Start with what’s quick and what Google reads directly: add local business schema, fix your page title and description, give the page one clear H1, then shrink your images. 64 of the 80 sites were missing at least one of those first four.

Based on what came up most, here’s the order I’d go in. Tick them off as you go:

Fix your plumbing website in this order

0/ 7

None of this needs a new website. If you want to check the technical bits yourself, my guide to Google Search Console shows you where everything is, and the free noindex checker will tell you in seconds if a page is blocked. For the wider picture, here are the SEO mistakes I find on most small business websites.

How I did the study

I didn’t test every plumber in the UK. I started with the 451 UK plumbers and heating engineers listed on OpenStreetMap, a free map that anyone can add businesses to, and tested the ones with their own website. After removing chains, merchants, duplicates, pages that didn’t load and sites that weren’t really plumbers, 80 home pages made the benchmark.

Figure

From 451 listings to 80 plumbers’ websites

  1. 01451 listings306 had no website listed
  2. 02117 unique websitesAfter removing 12 national chains, 11 merchants and manufacturers, 2 directories and duplicates
  3. 03102 home pages loaded15 didn’t load on the test connection
  4. 0480 plumbers’ sites22 parked, near-empty, merchants or not plumbers
OpenStreetMap listings tagged plumber or heating engineer in the UK, downloaded 21 October 2026. Home pages tested 27 October 2026. © OpenStreetMap contributors.

Each home page got the same checks:

  • Speed: Google PageSpeed Insights, mobile test, run three times with the middle result kept. Results were consistent: the typical gap between a site’s best and worst run was 7.5 points.
  • 10 SEO basics: HTTPS; one address (www and non-www end up in the same place); a sensible-length title; a meta description of a sensible length; exactly one H1; a mobile viewport; not blocked from Google; a sitemap; local business schema; alt text on every image.
  • Also recorded: the website builder, the footer copyright year and the word count.
  • Manners: the checker followed each site’s robots.txt, identified itself, waited between requests and collected no personal data.

What the data can’t tell you

I’d rather be upfront about the limits:

  • It’s 80 sites, not every plumber in the UK. A percentage from 80 sites can be about 10 points out either way. These are the 80 UK plumbers’ websites I tested, not “most plumbers”.
  • It’s what OpenStreetMap holds. That’s not a random sample, and businesses with websites are more likely to be on the map. So I haven’t quoted a figure for how many plumbers have no website at all.
  • Home pages only. A site’s other pages could be better or worse.
  • Lab test, not real visitors. Only 7 of the 80 sites get enough traffic for Google to publish real-visitor speed data, so I’ve stuck to the lab test for everyone.
  • The 15 that didn’t load may have failed on my test connection. Some open fine elsewhere, so they’re not counted as dead websites.
  • No names. The point is the pattern, not to embarrass anyone, so no business is named here or in the download.

Get the data

The full benchmark of 80 sites is free to download as a CSV: speed score, main-content time, layout shift, blocking time, page weight, each of the 10 basics as a yes or no, the builder and the footer year. Business names and addresses are taken out.

You’re welcome to use it. If you do, a link back to this page is appreciated, and the listings data needs crediting as © OpenStreetMap contributors (it’s under the Open Database Licence).

Common questions

How fast should a plumber's website load?

Google's line is 2.5 seconds for the main content of a page to appear, a measure called Largest Contentful Paint. In my test of 80 UK plumbers' home pages, only 7 managed it on Google's mobile test. Getting under 4 seconds already beats 65 of the 80.

What's a good PageSpeed Insights score for a small business website?

Google calls 90 to 100 good, 50 to 89 needs improvement and under 50 poor. Among the 80 plumbers' sites I tested, the middle score was 60.5 and only 7 scored 90 or more, so a score of 70 already beats 52 of them (65%).

What is local business schema?

It's a short piece of code in your page that spells out your business name, address, phone number, opening hours and service area in a format Google reads directly. It doesn't show on the page itself. 46 of the 80 plumbers' sites I tested (57.5%) didn't have it, which made it the most commonly missed basic.

Is WordPress bad for plumber websites?

Not on this evidence. WordPress ran 42 of the 80 sites, and their middle speed score (59.5) was almost exactly the overall middle (60.5). Speed came down to what was on each site, not the platform it was built on.

Can I see the data?

Yes. The full benchmark of 80 sites is free to download as a CSV, with every speed result and each of the 10 basics as a yes or no. Business names and web addresses are taken out, because the point is the pattern, not naming anyone.

Want to hand your site over to a professional?

Everything above is yours to run with. If you'd rather someone else ran it, send me the address and I'll tell you what I'd fix first — free, and in plain English.

Get a free SEO audit